Honda Review

2011 Benelli Tre 1130K

The 2011 Benelli Tre 1130K is renewed with the following components : Marzocchi forks with with oxydation of the fork sliders, totally adjustable in extension, compression and preload spring on both sliders, Radial front calipers Brembo, Incresed size of the seat allowing a much more comfortable riding position especially over long road journeys; The finishing of the rims is now metal grey, The hydraulic clutch command. Availability: March 2011 Colours: Grey


2011 Benelli Tre 1130K - Specifications
American MSRP: See your local Benelli dealer for pricing
Canadian MSRP: See your local Benelli dealer for pricing

ENGINE
TYPE
In line 3 cylinders, 4-stroke, liquid cooled , 4 valves per cylinder double
overhead camshaft, with balancer shaft
DISPLACEMENT
1131 c.c.
BORE x STROKE
88 x 62 mm
COMPRESSION RATIO
11,6:1
RATED OUTPUT
92 kW (123,4 cv) @ 9000 rpm
MAX. TORQUE
112 Nm (11.4 kgm) @ 5000 rpm
LUBRICATION Wet sump
OIL CAPACITY
4 lt
FUEL SUPPLY Electronic injection with three throttle bodies ø53 mm
EXHAUST SYSTEM With catalytic converter and oxigen sensor
CLUTCH Dry clutch with hydraulic command with slipper device
GEARBOX 6 speeds
PRIMARY DRIVE
44/79
GEAR RATIO
1° – 14/39
2° - 18/35
3° - 21/32
4° - 23/30
5° - 24/28
6° - 26/27
FINAL DRIVE Chain drive, ratio 16:34

ELECTRIC EQUIPMENT
IGNITION
WALBRO ECUA-1
SPARK PLUG
NGK CR9E
STARTING ELECTRIC

CHASSIS

TELAIO
FRAME Decomposable, front steel trestle, rear alluminium alloy casting
FRONT SUSPENSION
Ø50 mm upside-down fork, with idraulic extension / compression and spring preload adjustments
FRONT SUSPENSION STROKE : ANTERIORE 150 mm
REAR SUSPENSION
Steel tube trestle swingarm, rear dumper with idraulic adjustment (extension, high and low speed compression) and spring preload assembled with progressive link
REAR SUSPENSION STROKE : POSTERIORE 144 mm
FRONT BRAKE Twin floating disk ø320 mm with radial 4 piston calipers
REAR BRAKE Singol disk ø240 mm with double piston caliper
FRONT RIM TYPE Alluminium alloy
FRONT RIM DIMENSIONS
17”x3.50” DOT-D
REAR RIM TYPE Alluminium alloy
REAR RIM DIMENSION
POSTERIORE 17”x6.00” DOT-D
FRONT TYRE
120/70-ZR17
REAR TYRE
180/55-ZR17 (190/50-ZR17)

DIMENSIONS
LENGHT
2168 mm
WIDTH EXCLUDING MIRRORS
875 mm
HEIGHT EXCLUDING MIRRORS
1255 mm
SEAT HEIGHT
850 mm
WHEELBASE
1493 mm
GROUND CLEARANCE
140 mm
TRAIL
N.D.
STEERING PIPE ANGLE
N.D.
UNLADEN WEIGHT
215 kg
ROAD READY WEIGHT
240 kg
PERMITTED TOTAL WEIGHT
440 kg
USABLE TANK VOLUME
22 lt
RESERVE
4 lt
According to guideline 93/93/CEE with all fluids, fuelled with at least 90% of usable tank volume